Latest Updates
Home » Calamity Boards Model
Showing posts with label Calamity Boards Model. Show all posts
Showing posts with label Calamity Boards Model. Show all posts

Building the Boards for Calamity - Part 2

A short break from ReaperCon posts. Its still busy here so I need a little time to collect my thoughts. So on with something that I wrote earlier for exactly this circumstance.

This is a quick update. I found some Cellfoam at Hobby Lobby in 1/8" thickness. This is perfect for Calamity, although 1/4" would have worked as well. I can purchase blue or pink foam for the actual boards in 1" and 2" thicknesses so this fits my scale model quite nicely.  Unfortunately it doesn't shave down quite the way I wanted it to, but I think I can get it to work in creating the slope, or I'll just resort to clay again.

Again the model has shown me that I need to go 2" deeper if I want to have the special features that I was contemplating.



A single panel ready to drop in. This represents a piece of foam board 1" thick.

And a perfect fit, a second panel will fill up the space

The second panel in place. On the left you can see that the top is flush with the plywood edge.

Here on the right side you can see that the top piece of foam is fully exposed. I need to shave this down to form a gentle slope. I tried to cut it with a knife but just ripped up the foam. I'll try sanding it down on the next piece.
Once I have the foam fitted and sanded then I'll start cutting in the streets, tracks and building locations.
Posted at 2:48 PM
Read more

Building the boards for Calamity - Part 1

Building the actual boards for Calamity is likely to be a long process since work is restricting my free time so much. While I have decided that I still like to travel I have decided that I don't like to travel for work and being out of town 3 out of every 4 weeks means I don't accomplish much.

But I would really like to have the boards for Calamity done for Tacticon which takes place on Labor day weekend. I figure I better get started with something to show a little progress. In this case I have some issues I need to solve one how the support for the boards will be built and how everything will go together. Since I want to include both a small creek or river (so I can build at least one bridge!) as well as a slope some planning is definitely in order. The best way to visualize in three dimensions is to build a model. So that's what I'll build first a model of the supporting structure for the boards. For this particular model I decided I would go with 1/8" = 1" so 1 1/2 measured inches is equal to a foot. Its easy to measure out and it won't be huge, but will be big enough to show some detail.

I'm building this out of strip styrene from Evergreen. The base supports will be cut from 1x2 so in my chosen scale these will be cut from 1/8"x1/4" strips. Since I need to show some change in elevation as well, the outside will be made from 1/4" plywood which scales out to 1/32" (again my chosen scale of 1/8 makes the measurements easy). Of course they don't sell plastic strip like this so what I actually purchased was pack 189 (.125x.250) and a package of sheet styrene 9030 (.030 thick).

This is what I ended up with:

Marking out 16" centers for the center supports




All three 2'x4' sections finished. They are pretty close to being identical and they will certainly work for modeling purposes
So with the basic frames in place (which are actually 23 1/2" x 47 1/2") I'm ready to add the "plywood" side pieces.


On the left side its 5" in height on the left its 4" in height so the longer side pieces will have be cut at an angle to match the ends.


Here you can see how the foam will rest on the 1x2 supports and have the edges protected by the plywood. I'm considering going with 1/8" plywood instead but it may not be strong enough for traveling if I do that.

I think I like the slope, but I realized if I go with the current measurements of the plywood sides that I won't be able to include one of the features that I had wanted to add. I may add two more inches to the height but keep the slope the same.

So that's part 1 hopefully there won't be such a long gap in posts in the coming months.
Posted at 6:47 AM
Read more
Subscribe to: Posts (Atom)