Definitely need a visual record so here are a few pictures of the progress so far:
 |
| Starting from the front, getting ready to cut out the place for the front window. |
 |
| The inner core with the window cut out and my first attempt at cutting out the same position on the exterior siding piece. I reversed something because the opening is on the wrong side. I'll be saving that piece though, I might build a mirror image of this building, or it may be useful on something else, |
 |
| Now I have it right. |
 |
| Window in place on the inner core wall. |
 |
| Side wall with the window in place |
 |
| The other side with both windows cut out |
 |
| And now with the windows in place |
 |
| The back wall with the window in place |
 |
| Here is the back wall (before cutting out the window) lined up with the false front with the rear roof support. |
 |
| The back lean to all cut out with the window in place. Still need to cut a spot for the door. The vertical lines represent the places where I will glue on the battens. I'll do that before I assemble the structure, its just easier to do when the walls are still laying flat on the table. |
 |
| Close up on the front of the lean to. A couple of nicks with the knife that I'll have to clean up later. |
 |
| The main building pieces. Again the vertical lines are where the battens will be glued. |
 |
| A closer shot of the main building parts. Still need to get that doorway cut out. |
